RSS
|
Home
|
^<<Previous Blog
|
Next Blog^>>
|
Login
|
× Close

An-Najah National University

Shehdeh W. Jodeh

Tuesday, January 1, 2002
The effects of shear rate and capillary length-to-diameter ratio on isothermal extrudate swell of polymer melts
Published at:An-Najah University Journal for Research - Natural Sciences (A) ISSN: 1727-2114, Volume 16 , Issue 1 , 2002, Pages: 023-037
The objective in this article is to establish useful composition-processing structure-property relationships for predicting the rheological properties of automotive type multi-component polymer liquids, and to determine the effects of shear rate and capillary length-to-diameter ratio on isothermal extrudate swell of polymer melts.
This Article has been visited 2304 times

Attachments

236.pdf (ps)

PROFILE

Shehdeh W. Jodeh
Physical Chemistry

Show Full Profile English CV

PUBLISHED ARTICLES

- 2009 (3)
- - March (2)
  - Physical Vapor Deposition of Hydrogen Storage Alloys and Their Charecterestics as Metal Hydrides Electrodes
  - Characteristics of Removal of Hydrophobic Organic Carbons from Sand/Mulch Using Nonionic Surfactants
- - February (1)
  - Electrical properties study accompanying pyrolysis and ion implantation for prestine and poly(acrylonitrile)
- 2008 (2)
- - July (1)
  - Chemical structural characterization of pyrolyzed and subsequently ion-implanted poly(acrylonitrile)
- - January (1)
  - Sorption characteristics of a non-ionic surfactant in soil contaminated with decane
- 2007 (5)
- 2004 (1)
- - June (1)
  - Environmentally Friendly and Inexpensive Dielectric Coolant for Fuel Cell Stacks
- 2002 (1)
- - January (1)
  - The effects of shear rate and capillary length-to-diameter ratio on isothermal extrudate swell of polymer melts
- 2001 (3)
- - January (3)
- 2000 (2)
- - March (1)
  - Dependence of electrical properties on copolymer composition in polyaniline/polybutylene terephthalate-co-polytetramethylene oxide blends
- - January (1)
  - A Rheological Equation of State for the Steady-Shear Viscosity Properties of Multi-Component Polmer Liquids
- 1998 (1)
- - January (1)
  - Thermal Properties of Automotive Polymers IV. Thermal Gravimetric Analysis and Differential Scanning Calorimetry of Selected Parts from a Chevrolet Camaro
- 1994 (1)
- - January (1)
  - Internal state populations and the time-of-flight of ground-state species ejected after the 193 nm excimer laser ablation of CuO, BaO2, and Y2O3
- 1993 (1)
- - January (1)
  - Dynamics of laser sputtering of the hydroxyl radical from Ca(OH)2, Sr(OH)2, and sucrose samples